LED Solar Light with Motion Sensor and Control - 150w

LED Solar Light with Motion Sensor and Remote Control - 150w

This fantastic 150w LED solar light is an efficient lighting solution for the exterior of your home.

It charges automatically during the day through the solar panels, to provide you with automatic lighting at night (Photocell).

The light remains off during the day and turns on automatically at night.

Its integrated motion sensor uses the human body's infrared induction to automatically illuminate.

This device detects movement at a distance of up to 10 meters, automatically turning on when someone is nearby.

The lamp cover is adjustable, allowing you to direct the light where it is most needed.

It also has IP66 waterproof certification, which guarantees greater durability.

Using the practical remote control included, you can adjust the different light modes:

• Mode 1 - Remains off and turns on maximum light whenever movement is detected.
• Mode 2 - Stays on in low light and turns on full light when motion is detected.
• Mode 3 - Stays on constantly in medium light, even without detecting movement.
  
  

Ideal for installation on walls and exterior walls such as: corridors, backyards, awnings, patios, streets, parks, squares, condominiums, facades, gardens, paths, trails, garage fronts, country houses, entrances or also serving as a lighting pole.

It can be installed in several other locations, without the need for wiring.

Features:

• Material: ABS
• Color: Black
• 3 different lighting modes
• Motion detector
• The Sensor identifies human presence to activate the light
• Detection distance: Approximately 10 meters
• Daytime charging/nighttime lighting
• Remote control
• Versatile and waterproof (IP66)
• Durable structure
• Adjustable lamp cover
• Solar panel charging
• Extremely bright
• Can be fixed to the wall or glued
• 120-degree dimensional light space
• Automatic on at night and automatic off during the day.
• 3 built-in lithium batteries
• Product power: 3000 mA
• Solar panel input voltage: 6V/5W
• Induction lighting time: > 24 h
• Irradiation area: Approximately 120 square meters
• Adjustment angle: 180° left and right
• Estimated useful life: ≥ 50,000 h
• Integrated panel on the rear

Quick guide:

• The lamp is off during the day and on at night. There should be no light near the lamp, otherwise it will not turn on.
• The luminaire must be exposed directly to sunlight for at least 8 hours a day to ensure its lighting autonomy.
• It is important to note that there should be no shadows or objects between the sun and the lamp to avoid compromising its charging.
• When using the lamp for the first time, it must be turned on using the lamp's own button (switch) so that the remote control can communicate with the lamp. After this procedure, the lamp will only operate using the remote control.
• Remove the plastic tape/seal from the remote control, otherwise it will not work.
• The remote control has 3 lighting modes, and can also be operated by the button (Switch) on the lamp itself.
• Pets or birds may trigger the presence sensor.
• When the remote control or light stops working, the batteries must be replaced.

Package Contents:

• 1 Solar Light with Sensor
• Installation Kit: Screws and Plugs
• Command